Stratus Sedan V6-2.7L (2001)
2.
Locate the transmission control (EATX) relay in the PDC and then remove and discard the relay (Figure 1).
3.
Install the provided transmission control relay.
4.
Install the PDC cover.
Completion Reporting and Reimbursement
Claims for vehicles that have been serviced must be submitted on the DIAL System. Claims submitted will be used by DaimlerChrysler to record
Customer Satisfaction Notification service completions and provide dealer payments. Use the following labor operation number and time allowance:
Labor Operation
Time
Number
Allowance
Replace transmission control relay
08-97-41-82
0.2 hours
Add the cost of the relay plus applicable dealer allowance to your claim.
NOTE:
See the Warranty Administration Manual, Recall Claim Processing Section, for complete claim processing instructions.
Parts Return
Not required.
Dealer Notification and Vehicle List
All dealers will receive a copy of this Customer Satisfaction Notification letter by mail. Two additional copies will be sent through the DCMMS, and the
MDS2 will be updated to include this notification in the near future. Each dealer to whom involved vehicles were invoiced (or the current dealer at the
same street address) will receive a list of their involved vehicles. The vehicle list is arranged in Vehicle Identification Number (VIN) sequence. Owners
known to DaimlerChrysler are also listed. The lists are for dealer reference in arranging for service of involved vehicles.
DIAL System Functions 53 and VIP
All involved vehicles have been entered to DIAL System Functions 53 and VIP for dealer inquiry as needed.
Function 53 provides involved dealers with an updated VIN list of their incomplete vehicles. The customer name, address and phone number are listed if
known. Completed vehicles are removed from Function 53 within several days of repair claim submission. To use this system, type "53" at the "ENTER
FUNCTION" prompt, then type "0RD974".
Owner Notification and Service Scheduling