Stratus Sedan V6-2.7L (2001)
Fig. 13
5. Verify glass fit at mirror flag. Upper edge of the glass should be flush with the mirror flag top edge. Adjust the mirror flag position as necessary.
(Fig. 13).
6. Install side view mirror.
Door Opening Trim Welt
DOOR OPENING TRIM WELT
REMOVAL
1. Using trim stick, special tool C-4755, remove one end of door opening trim welt from door opening flange.
Fig. 4
2. Remove welt from vehicle (Fig. 4).
INSTALLATION
1. Position door opening trim welt on vehicle.
2. Butt end of welt to edge of header/A-pillar weatherstrip.
3. Push door opening welt onto door opening flange.
Rear Vertical Guide Bar
REAR VERTICAL GUIDE BAR
REMOVAL - JR-27 (Convertible)
