Stratus Sedan V6-2.7L VIN R (2002)
Fig. 10
1. JR-27 (Convertible), place the attaching sill clips in position as show in (Fig. 10).
Fig. 9
2. Place door sill trim panel into position (Fig. 9).
3. Align locator tab to the locator slot in door sill.
NOTE: Check that header/A-pillar and quarter panel weatherstrips are properly positioned. Incorrect positioning will interfere with clip
engagement to door opening flange and damage door sill trim panel.
4. Pushing downward on sill trim panel to engage tabs and attaching clips to the door sill.
Front Door Trim Panel
TRIM PANEL
REMOVAL
(1) Roll door glass down.
(2) Disengage two clips attaching speaker grille to door trim panel. They are at the front of the grille, one near the top, and the other one at the
bottom.