Stratus Sedan V6-2.7L VIN R (2002)
REPLACING THE OUTBOARD BOLT WILL DAMAGE THE SEAT TRACK BEYOND REPAIR.
3.
Install revised drive block screw, p/n 05080982AA, into the inboard drive block and finger tighten.
4.
Torque the drive block screw to 28 Nm (250 in. lbs.).
5.
Place seat attachment points on the floor and align the mounting holes.
6.
Tighten the seat to floor attaching bolts to 60 Nm (44 ft. lbs.).**
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE: