Stratus Sedan V6-2.7L VIN R (2002)
8. Remove the 4 bolts attaching the park brake lever mechanism bracket.
9. Remove the park brake lever mechanism from the vehicle.
INSTALLATION
1. Place the parking brake lever mechanism on the console bracket. Install the 4 bolts mounting the park brake lever mechanism to the console
bracket. Tighten the 4 mounting bolts to a torque of 28 Nm (250 inch lbs.).
2. Install the wiring harness on the park brake mechanism bracket.
3. Install the electrical connector on the ground switch of the park brake lever mechanism.
CAUTION: A new cable tension equalizer must be installed when replacing the park brake mechanism. The new cable tension equalizer is
required to correctly adjust park brake cable tension after installing park brake mechanism.
4. Install a NEW park brake cable tension equalizer on the park brake lever output cable and rear park brake cables.
CAUTION: A new park brake lever output cable retainer must be used when installing output cable on cable tension equalizer. Cable retainer
usage is required to ensure output cable can not separate from tension equalizer.
