Stratus Sedan V6-2.7L VIN R (2002)
a. Place tensioner into a soft jaw vise (Fig. 27).
b. SLOWLY compress tensioner until fabricated lock pin or the equivalent can be inserted into the locking holes.
c. Remove compressed and locked tensioner from the vise.
4. Insert the compressed and locked camshaft chain tensioner in-between the camshafts and chain.
5. Rotate the cams so that the plated links and dots are facing the 12:00 O'clock position (Fig. 28).
6. Install cams to cylinder head. Ensure that rocker arms are correctly seated and in proper positions.
7. Install camshaft bearing caps. Ensure that bearing caps are installed in same position as removed.
8. Tighten cam bearing cap bolts gradually in sequence shown in (Fig. 25) to 12 Nm (105 inch lbs.).
