Stratus Sedan V6-2.7L VIN R (2002)
12. Install left side lower chain guide and tensioner arm (Fig. 114). Tighten attaching bolts to 28 Nm (250 in. lbs.).
NOTE: Inspect O-ring on chain guide access plugs before installing. Replace O-ring as necessary.
13. Install chain guide access plugs to cylinder heads (Fig. 114). Tighten plugs to 20 Nm (15 ft. lbs.).
NOTE: To reset the primary timing chain tensioner, engine oil will first need to be purged from the tensioner (Fig. 117).
14. Purge oil from timing chain tensioner using the following procedure:
a. Place the check ball end of tensioner into the shallow end of Special Tool 8186 (Fig. 117).
b. Using hand pressure, slowly depress tensioner until oil is purged from tensioner (Fig. 117).
15. Reset timing chain tensioner using the following procedure:
