dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Position Lamp Replacement - Export|Page 7010 > < Parking Lamp|Diagrams|Page 7007
Page 1
background image

Parking Lamp: Service and Repair
Front Position Lamp Replacement - Export

REMOVAL 

1. Disconnect and isolate the battery negative cable.

Fig.17 Front Position Lamp Location

2. Remove headlamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/ HEADLAMP UNIT - REMOVAL ).

Fig.18 Front Position Lamp

3. Pull back rubber boot seal to expose lamp.
4. Pull front position lamp socket straight from the headlamp unit.
5. Remove bulb from socket.

INSTALLATION 

1. Insert bulb to socket.

Front Position Lamp Replacement - Export|Page 7010 > < Parking Lamp|Diagrams|Page 7007