Stratus Sedan V6-2.7L VIN R (2002)
Manifold Absolute Pressure (MAP) Sensor: Service and Repair
REMOVAL
1. Remove the negative battery cable.
Fig.22 Map Sensor - 2.7L
2. Disconnect the electrical connector from the MAP sensor.
3. Remove sensor.
INSTALLATION
Fig.23 Map Sensor O-Ring
1. The sensor mounts onto intake manifold plenum. Tighten screws to 4.5 N.m (40 in. lbs.) torque.
2. Attach electrical connector to sensor.
3. Install the negative battery cable.