Stratus Sedan V6-2.7L VIN R (2002)
Fuel Injector: Service and Repair
REMOVAL
1. Release fuel system pressure. Refer to Fuel System Pressure Release Procedure.
2. Disconnect negative cable to battery
3. Remove the Fuel Rail.
4. Position the fuel rail assembly so that the fuel injectors are easily accessible.
5. Remove retaining clips from fuel injectors at fuel rail.
6. Remove fuel injectors.
7. Repeat for remaining injectors.
8. Check injector O-ring for damage. If O-ring is damaged, it must be replaced. Replace the injector clip if it is damaged.
INSTALLATION
1. Check injector O-ring for damage. If O-ring is damaged it must be replaced. Replace injector clip if it is damaged.
2. Lightly lubricate the fuel injector O-rings with a couple drops of clean engine oil.
3. Install retaining clips on fuel injectors.
4. Push injectors into fuel injector rail until clips are in the correct position.
5. Install the Fuel Rail.
