Stratus Sedan V6-2.7L VIN R (2002)
RETURN HOSE TO RESERVOIR
1. Install return hose into routing clip on inside of right frame rail.
2. Install return hose (to reservoir) on right end of return hose tube below the bumper reinforcement. Install clamp securing hose in place.
3. Install front fascia.
4. Lower vehicle.
5. Install power steering fluid return hose on power steering fluid reservoir fitting. Be sure hose clamp is installed on hose past upset bead on power
steering reservoir fitting.
6. Slide reservoir down over guide on engine coolant recovery bottle.
7. Install power steering fluid reservoir mounting screw.
8. Fill reservoir with fluid and bleed system using Power Steering Pump Initial Operation standard procedure.
9. Check for leaks.
