Stratus Sedan V6-2.7L VIN R (2002)
STRAIGHT-AHEAD. The steering wheel must also be in the centered position.
22. Under instrument panel, align splines inside intermediate shaft lower coupling with splines on steering gear shaft and slide intermediate shaft onto
steering gear. Install a NEW coupling pinch bolt and tighten it to a torque of 44 Nm (32 ft. lbs.).
23. Remove steering wheel holder.
24. Fill power steering pump fluid reservoir to the proper level and perform Power Steering Pump Initial Operation standard procedure.
25. Check for leaks.
26. Lower vehicle.
27. Check front wheel alignment and adjust toe setting. Tighten tie rod jam nuts to 74 Nm (55 ft. lbs.) torque.