Stratus Sedan V6-2.7L VIN R (2002)
Suspension Strut / Shock Absorber: Description and Operation
Rear
DESCRIPTION - SHOCK ASSEMBLY
The rear shock absorber assemblies support the weight of the vehicle using coil springs positioned around the shock absorbers. The coil springs are
contained between the upper mount of the shock absorber and a lower spring seat on the body of the shock absorber.
The top of each shock absorber assembly is bolted to the top of the inner fender through a microcellular urethane isolated mount.
The bottom of the shock absorber assembly attaches to the rear knuckle using a thru-bolt.
The rear coil springs are rated separately for each corner or side of the vehicle depending on optional equipment and type of vehicle service. Coil
springs come in a various rates; be sure the correct spring is in use.
The components of the shock assembly listed below are serviceable:
^
Shock rod nut
^
Shock mount
^
Shock rod bushings
^
Upper spring isolator
^
Dust shield
^
Cup
^
Jounce bumper
^
Lower spring isolator
^
Coil spring
^
Strut
OPERATION - SHOCK ASSEMBLY
The shock absorber assembly cushions the ride of the vehicle, controlling vibration, jounce and rebound of the suspension.
The coil spring controls ride quality and maintains ride height.
The jounce bumper limits suspension travel and metal-to-metal contact under full jounce.
The shock absorber dampens jounce and rebound motions of the coil spring and suspension.
