Stratus Sedan V6-2.7L VIN R (2002)
Fig.10 TCM And Mounting Bracket
7. Remove TCM mounting bracket from TCM (Fig. 10).
INSTALLATION
NOTE: If transmission control module is being replaced with a new or replacement unit, the Pinion Factor and Quick Learn procedures must be
performed. (Refer to ELECTRICAL/ELECTRONIC CONTROL MODULES/TRANSMISSION CONTROL MODULE - STANDARD
PROCEDURE) (Refer to ELECTRICAL/ELECTRON IC CONTROL MODULES/ TRANSMISSION CONTROL MODULE - STANDARD
PROCEDURE)
1. Install TCM mounting bracket to TCM (Fig. 10) and torque screws to 11 Nm (72 in. lbs.).
2. Install TCM 60-way connector and torque to 4 Nm (35 in. lbs.).
3. Install TCM/bracket into position (Fig. 9).
4. Install and torque TCM bracket-to-PDC bracket mounting screw to 5 Nm (40 in. lbs.).
5. Install air cleaner assembly into position.
6. Install and torque air cleaner-to-PCM stud nut to 5 Nm (40 in. lbs.).
7. Connect battery negative cable.
