dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Headliner|Service and Repair|Page 6004 > < Glove Box|Page 6000
Page 1
background image

Headliner: Service and Repair

HEADLINER 

REMOVAL 

CAUTION:  Special Tool 6967 is needed to remove the rear locating clip attached to the headlining just forward of the rear window. 

1. Remove the door opening weatherstrips.
2. Remove instrument panel end cap/fuse cover.
3. Remove the sun visors.
4. Remove sun visor supports.
5. Remove left A-pillar trim.
6. Remove front/rear assist handles and/or coat hooks.
7. Remove right and left upper B-pillar trim.
8. Remove upper quarter trim, as necessary. Refer to Trim Panel.
9. Disconnect headliner electrical connector along instrument panel bracket.

Fig. 16

10. Disconnect headliner electrical connector from fuse panel (Fig. 16).
11. Pull down on the rear of the map lamp and sun roof switch to disengage clips from roof panel, if equipped.

Headliner|Service and Repair|Page 6004 > < Glove Box|Page 6000