Stratus Sedan V6-2.7L VIN T FFV (2003)
Brake Shoe: Service and Repair
REMOVAL
NOTE: Before proceeding, Refer to BRAKES WARNING.
NOTE: Make sure parking brake is in "released" position before raising vehicle.
1. Raise vehicle.
2. Remove both rear tire and wheel assemblies from vehicle.
3. Remove brake drums from both sides of vehicle.
NOTE: Perform Step 4 through Step 12 on each side of the vehicle to complete shoe set removal. It may be easier to install the new components
on the first side of the vehicle before disassembling the opposite side, so it may be used as a reference guide for proper installation.
4. Remove hub and bearing dust cap.
5. Remove hub and bearing retaining nut, then slide hub and bearing off spindle.
6. Compress cable return spring, then remove parking brake cable from parking brake lever.
