Stratus Sedan V6-2.7L VIN T FFV (2003)
8. Install 12 point 1/2 inch or 13 mm box wrench over parking brake cable retainer as indicated. This will compress tabs on parking brake cable
retainer allowing cable to be removed from console bracket. From under carpet, grasp park brake cable housing and pull cable straight out of
console bracket.
9. Raise vehicle.
10. Remove rear wheel and tire assembly.
11. On vehicles with rear disc brakes, remove caliper, rotor, hub and bearing, and parking brake shoes.
12. On vehicles with rear drum brakes, remove hub and bearing dust cap and retaining nut, then slide hub and bearing off spindle.
13. Remove parking brake cable from parking brake actuating lever.