Stratus Sedan V6-2.7L VIN T FFV (2003)
Valve Cover: Service and Repair
Left Side Cover
CYLINDER HEAD COVER - LEFT
REMOVAL
1. Disconnect negative battery cable.
2. Remove upper intake manifold.
3. Disconnect electrical connectors from ignition coils and capacitor. Reposition electrical harness.
4. Remove ground strap from cylinder head cover stud.
5. Disconnect electrical harness retaining clips from cylinder head cover studs. Reposition electrical harness.
6. Remove fastener attaching ignition coil capacitor.
7. Remove ignition coils.
8. Loosen all cylinder head cover fasteners (Fig. 30).
NOTE: Cylinder head cover attaching bolts are captured to the cover.
CAUTION: Make certain the double ended studs in the center of the cylinder head cover are loose before attempting to remove cover (Fig. 30).
9. Remove cylinder head cover.
INSTALLATION
