Stratus Sedan V6-2.7L VIN T FFV (2003)
Intake Manifold: Service and Repair
Upper Intake Manifold
UPPER INTAKE MANIFOLD
REMOVAL
1. Disconnect negative battery cable.
2. Remove throttle body air inlet hose and air cleaner housing assembly.
3. Remove throttle cable shield. Remove throttle and speed control cables from throttle arm and bracket.
4. Remove throttle cable bracket.
5. Disconnect electrical connectors from the following components:
^
Manifold Absolute Pressure (MAP) Sensor
^
Throttle Position Sensor (TPS) Sensor
^
Idle Air Control (IAC) Motor
6. Disconnect Vapor Purge hose, Brake Booster hose, Speed Control Servo, Positive Crankcase Ventilation (PCV) hose.
7. Loosen upper fastener at throttle body support bracket.
8. Remove manifold attaching bolts (Fig. 106).