Stratus Sedan V6-2.7L VIN T FFV (2003)
Timing Chain: Service and Repair
REMOVAL
Timing Chain
1. Disconnect negative battery cable.
2. Drain cooling system.
3. Remove upper intake manifold.
4. Remove cylinder head covers, crankshaft vibration damper, and timing chain cover.
CAUTION: When aligning timing marks, always rotate engine by turning the crankshaft. Failure to do so will result in valve and/or piston
damage.
5. Align crankshaft sprocket timing mark to mark on oil pump housing (Fig. 112). The mark on oil pump housing is 60 °ATDC of # 1 cylinder.
CAUTION: When the timing chain is removed and the cylinder heads are still installed, DO NOT rotate the camshafts or crankshaft without first
locating the proper crankshaft position. Failure to do so will result in valve and/or piston damage.
6. Remove power steering pump and bracket as an assembly. Do not disconnect power steering lines from pump. Reposition pump and support with
suitable retaining strap.
