Stratus Sedan V6-2.7L VIN T FFV (2003)
21. Activate the timing chain tensioner by using a flat bladed pry tool to gently pry tensioner arm towards the tensioner slightly (Fig. 119). Then
release the tensioner arm. Verify the tensioner is activated (extends).
22. Install power steering pump and bracket assembly.
23. Install camshaft position sensor and connect electrical connector.
24. Install the timing chain cover, crankshaft vibration damper, and cylinder head covers.
25. Install upper intake manifold.
NOTE: After installation of a reset tensioner, engine noise will occur after initial start-up. This noise will normally disappear within 5 - 10
seconds.
26. Fill cooling system.
27. Connect negative battery cable.
Crankshaft Sprocket
1. Install crankshaft sprocket using Special Tools 6780-1 and 8179 (Fig. 120) until sprocket bottoms against crankshaft step flange. Use care not to
rotate crankshaft.
