Stratus Sedan V6-2.7L VIN T FFV (2003)
Evaporator Coil (New) H-Valve
9. Lift evaporator out of bottom housing.
10. Remove styrofoam seal around evaporator.
INSTALLATION
1. Install evaporator coil into lower housing.
NOTE: Please be sure to install styrofoam seal on evaporator. Failure to install seal correctly could result in water leakage from HVAC unit into
passenger compartment.
2. Install evaporator temperature sensor. See: Evaporator Temperature Sensor / Switch/Service and Repair
3. Install upper housing onto lower housing and install screws.
4. Connect recirculation motor connector.
5. Install evaporator seal.
6. Install HVAC harness on upper housing.
7. Install HVAC housing in vehicle. See: Housing Assembly HVAC/Service and Repair
