Viper V10-488 8.0L (1992)
Water Leak Between Top And Side Curtains With Top Installed
MODELS:
1992 - 1995 (SR) Dodge Viper
SYMPTOM/CONDITION:
With the vehicle top installed, a water leak may develop between the top and side curtains. The leak may be experienced while parked or driving in rainy
weather due to improper sealing between the top and side curtains.
DIAGNOSIS:
During a rain or with a light stream of water directed onto the top, inspect between the top and side curtains. If water is found perform the Repair
Procedure.
PARTS REQUIRED:
1
P/N 05010323AA
Top Side Rail Kit
The kit includes:
1 set of side rails (left & right)
2 foam seal pads
2 U-shaped foam seals
6 velcro patches
2 velcro straps
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-05-01-90
0.8 Hrs.
Replace Right and Left
Side Rails Within The
Top
23-05-01-91
0.3 Hrs.
Adjust Top (If Necessary)
FAILURE CODE: P8 - New Part
Repair Procedure
This bulletin involves the replacement of the right and left side rails within the top assembly.
1.
Remove the top and place on a flat surface ( Figure 1).
2.
Remove the foam pad from the right and left rear pivot and discard.
