Viper V10-488 8.0L (1992)
3. Tighten the cylinder head bolts 1 thru 12 in sequence, 2 Step Torque Sequence:
-
First to 41 Nm (30 ft. lbs.).
-
Second- Turn 1/4 turn.
4. Tighten valley bolts A thru F in sequence to 11 Nm ( 95 in. lbs.) after head bolts 1 thru 12 have been tighten to specifications.
5. Inspect push rods and replace worn or bent rods.
6. Install push rods, rocker arm and pedestal assemblies into position, tighten to 40 Nm (30 ft. lbs.).
7. Place new cylinder head cover gaskets in position and install cylinder head covers. Tighten to 11 Nm (95in. lbs.).
