Viper V10-488 8.0L (1992)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Left Ign. Coil Pack
REMOVAL
1. Disconnect negative battery cable.
2. Disconnect idle air control motor (IAC) wiring connector.
3. Remove the mounting screws (2), and remove IAC housing from intake manifold.
INSTALLATION
1. Install IAC motor into housing.
2. Install housing to intake manifold.
3. Torque housing to 17 in lb (2 Nm)
4. Connect IAC electrical connector.
5. Connect negative battery cable.