Viper V10-488 8.0L (1992)
Fuel Injector: Service and Repair
Fuel Injector Connector
NOTE: Fuel system pressure must be released prior to any service of fuel injection components.
NOTE: Tag injector electrical connectors for proper cylinder identification.
REMOVAL
1. Disconnect negative battery cable, and remove fuel tank cap.
2. Disconnect injector electrical connector.
3. Remove injector hold down clamp.
Injector Removal
4. Rotate injector until connector faces intake plenum. With a screwdriver pry injector from manifold. (Do not use excessive force.)
5. Remove O-rings from injector.