Viper V10-488 8.0L (1992)
Fuel Line Quick Connect Fitting
3. Push fitting over fuel tube until retainer seats and a click is heard. When the fitting is properly plastic retainer should be in the out position.
4. Verify connection by pulling on the fuel tube. If fitting locks in place connection is secure.
5. Use the Automatic Shut Down (ASD) Fuel System Test on the DRB II to pressurize the fuel system and check for leaks.
CAUTION: The ASD relay and the fuel pump relay will remain energized for 7 minutes during this test unless the test is stopped or the ignition switch
is turned to the OFF position.
