Viper V10-8.3L VIN Z (2004)
Console: Service and Repair
Center Console Bezel
CENTER CONSOLE BEZEL
REMOVAL
Fig. 13
1. Using a trim stick C-4755 or equivalent, pry up the bezel. (Fig. 13)
2. Loosen the shifter lock nut and unscrew the shifter knob.
3. Disconnect the electrical connectors and remove the bezel.
INSTALLATION
1. Connect the console bezel electrical connectors.
2. Install the shift knob and tighten the lock nut to 41 N.m (30 ft.lbs.).
3. Position the bezel and seat the spring clips fully.