Viper V10-8.3L VIN Z (2004)
TRIM PANEL
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the speaker.
3. Remove the three trim panel screws in the speaker opening.
Fig. 19
4. Using a trim stick C-4755 or equivalent, remove the trim plug at the interior release handle and remove the screw. (Fig. 19)
Fig. 20
5. Remove the pull handle screw and remove the pull handle cover (Fig. 20).
6. Remove the two screws under the pull handle cover. (Fig. 20)
7. Remove the screw at the front of the trim panel.