Viper V10-8.3L VIN Z (2004)
18.
Disconnect the cooling fan module electrical connector and hydraulic lines (Figure 3).
19.
Remove the coolant recovery bottle.
20.
Remove the cooling fan module (Figure 4).
21.
Remove the crankshaft pulley.
22.
Remove the crankshaft vibration damper using special tool # 1023 (puller) and special tool # 6827-A (insert).
23.
Inspect the mating surfaces of the crankshaft and vibration damper. If there is evidence of the damper slipping on the crankshaft, polish the
crankshaft with emery or crocus cloth and discard the vibration damper.
24.
Remove the pressure hose from the power steering pump.
