Viper GTS V10-488 8.0L (1998)
a.
Install front and rear Vehicle Height Checking Fixture (Special Tool # 6914) at the base of both inner flanges of the front and rear wheels as
shown in Figure 50.
NOTE:
Vehicles equipped with the ACR package and/or BBS racing wheels must have Special Tool # 8396-1 adapters installed onto Special
Tool # 6914 checking fixture before installing on the front and rear wheels.
b.
Check the distance from the bottom of each of the front frame rails to the top surface of the Vehicle Height Checking Fixture (Special Tool
# 6914) (Figure 51). The distance should be:
^
1996 and 1997 model year:
1-1/2 inches +/- 1/4 inch
(38 mm +/- 6 mm).
^
1998 and 1999 model year:
2 inches +/-m 1/4 inch
(50 mm+/- 6 mm).
c.
Check the distance from the bottom of each of the rear frame rails to the top surface of the Vehicle Height Checking Fixture (Special Tool #
6914) (Figure 52). The distance should be:
^
1996 and 1997 model year:
2 inches +/- 1/4 inch
(50 mm +/- 6 mm).
^
1998 and 1999 model year:
