Viper GTS V10-8.0L VIN E (1999)
13. From under vehicle, remove cable requiring service, out of tunnel area of vehicle.
NOTE: If the left park brake cable is being replaced it is only clipped to the rear frame rail and not to the frame crossmember. The left park brake
cable is held in place at the crossmember by the differential. The differential will need to be lowered enough to remove the park brake cable from
between the differential and crossmember.
14. Remove the 2 clips attaching the park brake cable to the frame crossmember and rear frame rail.
15. Remove the tie strap attaching the park brake cable to rear knuckle.
16. Remove the park brake cable from the park brake operating lever on the caliper. Slide park brake cable out of cable mounting hole in caliper
assembly.
