Viper GTS V10-8.0L VIN E (1999)
Piston Ring: Service and Repair
Fitting Piston Rings
FITTING PISTON RINGS
Piston Ring Gap Measuring-Typical
1. Wipe cylinder bore clean. Insert ring and push down with piston to ensure it is square in bore. The ring gap measurement must be made with the
ring positioning at least 12 mm (0.50 inch) from bottom of cylinder bore. Check gap with feeler gauge. Refer to Specifications.
Piston Ring Side Clearance Measuring
2. Check piston ring side clearance. Refer to Specifications.