Viper GTS V10-8.0L VIN E (1999)
Headlamp Switch: Testing and Inspection
Headlamp Switch
1. Remove headlamp switch, refer to Headlamp Switch Removal and Installation.
2. Using a ohmmeter check headlamp switch. Check for continuity between Pins:
a. Turn switch to the park position and check Pin 3 to Pin 11.
b. Turn switch to the headlamp ON position and check Pin 11 to Pin 12.
c. Pull switch knob to the fog lamp position with the park or headlamps in the ON position. Check Pin 8 to Pin 10.
d. Park or headlamps in the ON position, check Pin 7 to Pin 9.
3. If no continuity, replace headlamp switch. If OK, check headlamp relay, circuit and repair as necessary.
