Viper GTS V10-8.0L VIN E (1999)
Fuel Tank: Service and Repair
Fuel Tank Replacement
REMOVAL
1. Release fuel system pressure. Refer to Fuel Pressure Release Procedure.
See: Fuel Filter/Fuel Pressure Release/Service and Repair
2. Disconnect positive battery cable at the PDC.
3. Drain the fuel tank before removing it from the vehicle. Refer to Draining Fuel Tank.
See: Fuel Tank Draining Procedure
Fuel Tank Closeout Panel
The trunk will have to have an closeout panel cut into it for servicing the fuel tank.
4. Remove spare tire. Remove spare tire tool kit.
5. Remove trunk trim panels from trunk area.
6. Remove the radio amplifier and bracket.
7. Remove trunk carpet.
8. Cut closeout panel hole for fuel tank.
Fuel Filler Neck Removal/Installation
9. Remove Fuel Filler neck mounting screws.
10. Reach inside and disconnect the filler tube at the fuel tank.
