Viper GTS V10-8.0L VIN E (1999)
Alignment: Service and Repair
Vehicle Height Adjustment
Curb Height Checking and Setting
Viper alignment specifications must be checked, and all alignment adjustments made with the vehicle at its required curb height specification.
1. Correctly position the vehicle on alignment equipment per the equipment manufacturer's recommendations.
2. Check all tires for proper inflation pressure and adjust as necessary.
NOTE: When the height checking fixtures are installed on the wheels, they must be positioned at the very bottom of the wheel rim. This is
required to ensure the height checking fixtures are parallel to the bottom surface of the frame rails, which is required to achieve an accurate vehicle
design height measurement.
Vehicle Height Checking Fixtures
Vehicle Front Height Checking Fixture Installed
Vehicle Rear Height Checking Fixture Installed
3. Install front and rear Vehicle Height Checking Fixtures, Special Tool 6914, at the base of both inner rim flanges of the front and rear wheels as
shown.
Height Checking Fixture Installation On Wheel