Viper GTS V10-8.0L VIN E (1999)
Tools Installed For Removing Upper Ball Joint
17. Install Puller, Special Tool 6961, between Adapter, Special Tool 6962, and the stud of the upper ball joint. Hold hex portion of Puller, Special
Tool 6961, while turning the bolt to apply pressure against the stud of the upper ball joint. Continue applying pressure until the upper ball joint
stud separates from the steering knuckle.
18. Remove the cotter pin and castle nut from the rear toe link tie rod.
Toe Link Tie Rod Removal
19. Remove the toe link tie rod end from the steering knuckle using Puller, Special Tool C-3894-A.