Viper RT-10 V10-8.0L VIN E (1997)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Fig 36 Engine Coolant Temperature Sensor
The engine coolant temperature sensor threads into front of the drivers side head. (Fig. 36).
REMOVAL
1. Drain the cooling system.
2. Disconnect the electrical connector from the engine coolant temperature sensor.
3. Remove the sensor.
INSTALLATION
1. Install sensor. Tighten to 28 Nm (20 ft. lbs.) torque.
2. Connect electrical connector to sensor.
3. Fill cooling system.