Viper RT-10 V10-8.0L VIN E (1997)
9. Connect ignition coils and the two electrical connectors at rear of engine.
10. Install cowl cover. Refer to Body and Frame.
11. Connect the wiring connector to the Throttle Position Sensor (TPS).
12. Install throttle cable.
13. Install air cleaner and throttle body hose assemblies. Connect intake air temperature sensor electrical connector to air cleaner assembly.
14. Connect negative battery cable.
15. With the DRBIII Scan Tool use Auto Shutdown (ASD) Fuel System Test to pressurize system to check for leaks.
CAUTION: When using the ASD Fuel System Test, the ASD relay will remain energized for 7 minutes or until the ignition switch is turned to the OFF
position, or Stop All Test is selected.
