Viper RT-10 V10-8.0L VIN E (1997)
Air Conditioning Indicator Lamp: Description and Operation
CIRCUIT OPERATION
The illumination lamps are controlled by the dimmer switch internal to the headlamp switch. Power for the lamps is supplied on circuit E2. This
circuit is protected by a 4 amp fuse in cavity 2 of the fuse block.
Power for the fuse is supplied on circuit E1 from the headlamp switch. This circuit is HOT when the headlamp switch is in the PARKING lamp or
ON position.
Battery voltage for this portion on the headlamp switch is supplied on circuit F34 from the 20 amp fuse in cavity 11 of the Power Distribution
Center (PDC). This fuse is HOT at all times.
