Viper RT-10 V10-8.0L VIN E (1997)
Unseated Key Cylinder
b. Rotate key clockwise to the OFF position.
-
Key cylinder will unseat from ignition switch.
-
When key cylinder is unseated, it will be approximately 1/8 inch away from ignition switch halo light ring.
-
Do not attempt to remove key cylinder at this time.
c. With key cylinder in unseated position, rotate key counterclockwise to the lock position and remove key.
Key Cylinder Removal
d. Remove key cylinder from ignition switch.
INSTALLATION
1. Connect electrical connectors to ignition switch. Make sure that switch locking tabs are fully seated in wiring connectors.