Viper RT-10 V10-8.0L VIN E (1997)
3. Loosen but do not remove the nut, attaching the rear stabilizer bar link to the lower control arm. Thread the nut to the end of the stabilizer bar
attaching link stud.
CAUTION: The nut must be positioned at the end of the stabilizer bar attaching link stud when removing it from the lower control arm. This will
prevent the end of the stud from being damaged when removing it from the lower control arm.
4. Remove the stabilizer bar attaching link from lower control arm using the following procedure. Position the attaching link nut at the end of attaching
link stud. Position a center punch in the hole on the end of the attaching link stud. Strike the center punch, to remove the attaching link stud from the
lower control arm.
5. Remove the bolt and nut mounting the shock absorber clevis to the mounting bracket on the lower control arm.
