Viper RT-10 V10-8.0L VIN E (1997)
Control Arm Bushing: Service and Repair
Upper Arm Bushing
Front
NOTE: For replacement of the upper control arm isolator bushings, the upper control arm must be removed from the vehicle.
DISASSEMBLY
1. Remove the upper control arm from the vehicle.
CAUTION: The jaws of the vise must be covered with protective caps to protect the surface of the control arm from damage.
2. Clamp the upper control arm securely in a vise.
3. Remove the nut and washer from each end of the upper control arm pivot bar.