Viper RT-10 V10-8.0L VIN E (1997)
Technical Service Bulletin # 998
Date: 020501
Recall - Steering and Differential Frame Repair
May 2002
Safety Recall No. 998
Steering and Differential Frame Repair
Models
1996-1999 (SR) Dodge Viper (Coupe and Roadster)
NOTE:
This recall applies only to the above vehicles built through March 1, 1999 (MDH 030110).
IMPORTANT:
Some of the involved vehicles may be in dealer used vehicle inventory.
Dealers should complete this recall service on these vehicles before retail delivery.
Dealers should also perform this recall on vehicles in for service. Involved vehicles can be determined by using the DIAL VIP System.
Subject
Aggressive driving, such as racing, on about 4,700 of the above vehicles, may lead to cracking and separation of the steering gear crossmember from the
frame. This can cause unexpected steering looseness and lag. Aggressive driving can also lead to cracking and separation of a differential mounting
bracket winch could cause a loss of vehicle control. Either condition could result in an accident without warning.
Repair
The steering gear crossmember must be inspected for cracks. Vehicles with a cracked steering gear crossmember must have the crossmember replaced.
All involved vehicles must have frame gussets and a steering gear crossmember reinforcement bracket installed.
In addition, the left differential mounting bracket must be inspected for cracks. Vehicles that have a cracked mounting bracket must have the bracket
installed.
Parts Information
A.
Frame Reinforcement Package
NOTE:
Frame reinforcement pages CAAM9981 and CAAP9982 are required to repair each vehicle. Additional parts packages, listed below, may be
required depending on the conditions found on a particular vehicle.
Part Number
Description
CAAM9981
Steering Reinforcement Package
Each package contains the following components:
Quantity
Description
1
Steering Gear Crossmember Reinforcement
1
Right Side Frame Rail Gusset
1
Left Side Frame Rail Gusset
24
Structural Steel Rivets
Part Number
Description
CAAP9982
Differential Reinforcement Package
Each package contains the following components:
Quantity
Description
1
Differential Support Bracket
