Viper RT-10 V10-8.0L VIN E (1997)
Stabilizer Link: Service and Repair
Front
NOTE: The sway bar links, used on front sway bar of the Viper can be replaced without having to remove sway bar assembly from vehicle.
REMOVE
1. Raise vehicle on jackstands or centered on a frame contact type hoist.
2. Remove front wheel and tire assemblies.
3. Remove the nut attaching the stabilizer bar attaching link to the stabilizer bar.
CAUTION: Use only Puller, Special Tool MB991113, or equivalent to remove the attaching link from the stabilizer bar. Use of a pickle fork or
other alternate tool will damage the seal and ball joints on attaching link.
4. Remove the stabilizer bar attaching link from the stabilizer bar, using Puller, Special Tool
