Viper RT-10 V10-8.0L VIN E (1997)
8.
Use the following procedure to connect the fuel tube quick connect fitting:
a.
Using a clean lint free cloth, clean the fuel tube nipple and retainer.
b.
Prior to connecting the fitting to the fuel tube, coat the fuel tube nipple with clean 30 weight engine oil.
c.
Push the quick-connect fitting over the fuel tube until the retainer seats and a click is heard.
d.
The plastic quick-connect has windows in the side of the casing. When the fining completely attaches to the fuel tube, the retaining locking
ears and the fuel tube shoulder are visible in the windows. If they are not visible, the retainer was not properly installed (Figure 39). Do not
rely upon the audible click to confirm a secure connection. Pull back on the quick-connect to ensure a secure connection.
9.
Connect the fuel pump module electrical connector.
10.
Connect the rollover valve hose at the fuel pump module.
11.
Connect the vent hose to the filler tube (Figure 19).
12.
Using a twisting motion, install the aluminum fuel filler cap cover onto the fill tube.
13.
Install the fuel filler cap cover screws.
14.
Install the fuel pump module access cover using four (4) supplied rivets (P/N 06034578).
CAUTION:
Rivet gun (P/N W-AK17SACH) requires the use of the provided gold color nose piece (P/N W-202145) to correctly install the fuel pump
module access cover rivets (P/N 06034578).
