Viper SRT-10 V10-8.4L (2008)
Front Fender Liner: Service and Repair
Front Wheelhouse Splash Shield - Removal
REMOVAL
1. Remove the front wheel. See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Removal
2. Remove the two screws and two push pin fasteners (2).
3. Remove the front splash shield (3).
4. Remove the four fender screws.
5. Remove the three lower push pin fasteners and two inner screws.
6. Remove the rear splash shield.