Viper SRT-10 V10-8.4L (2008)
Trim Panel: Service and Repair
Bulkhead Trim Panel - Removal
Bulkhead Trim Panel - Coupe
REMOVAL
1. Move seats forward.
2. Remove sill plates.
3. Remove B-pillar mouldings.
4. Remove bulkhead screws.
5. Disconnect speakers.
6. Remove bulkhead from vehicle.
Bulkhead Quarter Trim Panel
REMOVAL
1. Open the top.
2. Move the drivers seat forward.
3. Remove the lower seat belt anchor.
4. Remove the sill plate.
5. Remove the sport hoop fastener cover.
6. Remove the two bolts and remove the sport hoop.
NOTE: Convertible bulkhead trim panel shown. Coupe similar.