Viper SRT-10 V10-8.4L (2008)
Trim Panel: Service and Repair
Cowl Trim
Cowl Trim - Removal
REMOVAL
1. Using a trim stick C-4755 or equivalent, scuff plate.
2. Remove the rear screw.
3. Remove the two push pin fasteners.
4. Remove the cowl trim panel.
Cowl Trim - Installation
INSTALLATION
1. Install the cowl trim panel.
2. Install the push pin fasteners.
3. Install the rear screw.
4. Install the door scuff plate and seat the spring clips fully.