Viper SRT-10 V10-8.4L (2008)
Trim Panel: Service and Repair
Door Surround Panel
Removal
REMOVAL
1. Using a trim stick C-4755 or equivalent, remove the door sill.
2. Separate the primary door seal from the surround.
3. Remove the front screws.
4. Remove the side and top screws.
5. Using a flat blade scraper, cut the sealant from between surround panel, frame and front of dash panel.
Installation
INSTALLATION
1. Clean sealant residue from frame and sill panel.
2. Paint metal panels to avoid corrosion if necessary.
3. Apply new sealant to the frame and front of dash.
4. Install surround panel.
5. Install the screws.
6. Install the primary door seal.
7. Install the door sill panel.